• Umberto Berardi Ryerson University


Current solutions to absorb sound have technical limitations in being tailored to the specific acoustic requirements of a space. In fact, porous materials show high absorption at higher frequency, while at low frequency, the use of porous materials often require an impracticable significant thickness. Alternatively, resonance absorption mechanisms (either Helmholtz resonators or vibrating panels) show low frequency absorption but in limited frequency ranges. This research focuses on absorbers created using additive manufacture in order to absorb in the low frequency rage using passive destructive interference principles. Additive manufacturing allows for the fabrication of unique pieces with complex and freeform curved geometries. Focusing on geometrical aspects, this paper presents the results of the investigation of an ongoing project to create a large thin transparent panel with absorption above 0.6 below 250 Hz with limited thickness.

Author Biography

Umberto Berardi, Ryerson University
Dr. Berardi is an Associate Professor at Ryerson University, in Toronto (Ontario, Canada). His main research interests and contributions are related to the study of building systems that incorporate new materials for improved performance. He is the Editor-in-Chief of the Journal Canadian Acoustics, and he has been the editor of several special issues for several journals
How to Cite
Berardi U. DESTRUCTIVE INTERFERENCES CREATED USING ADDITIVE MANUFACTURING. Canadian Acoustics [Internet]. 2017Aug.14 [cited 2020Jun.5];45(3):44-5. Available from: //
Proceedings of the Acoustics Week in Canada

Most read articles by the same author(s)

<< < 1 2 3