Suggestions for change to ISO 9614

Authors

  • R.W. Guy Concordia Univ., Montreal, Que., Canada
  • J. Li Concordia Univ., Montreal, Que., Canada

Keywords:

acoustic intensity measurement, measurement standards, ISO 9614, Sound power measurement, semi anechoic chamber, pressure-pressure finite difference probe system, real time band analysis, surface pressure-intensity indicator

Abstract

A Sound power measurement within a small semi anechoic chamber was undertaken in accordance with ISO Draft Standard 9614 employing a pressure-pressure finite difference probe system with real time band analysis. It was found that F2, designed as an overall surface pressure-intensity indicator, was negative in a particular low frequency band. This result was inconsistent to it's ultimate use within a qualification criterion and in consequence an investigation into the cause was undertaken

Downloads

Published

1991-09-01

How to Cite

1.
Guy R, Li J. Suggestions for change to ISO 9614. Canadian Acoustics [Internet]. 1991 Sep. 1 [cited 2023 Feb. 2];19(4):61-2. Available from: https://jcaa.caa-aca.ca/index.php/jcaa/article/view/671

Issue

Vol. 19 No. 4 (1991)

Section

Proceedings of the Acoustics Week in Canada

License

Copyright on articles is held by the author(s). The corresponding author has the right to grant on behalf of all authors and does grant on behalf of all authors, a worldwide exclusive licence (or non-exclusive license for government employees) to the Publishers and its licensees in perpetuity, in all forms, formats and media (whether known now or created in the future)
i)    to publish, reproduce, distribute, display and store the Contribution;
ii)    to translate the Contribution into other languages, create adaptations, reprints, include within collections and create summaries, extracts and/or, abstracts of the Contribution;
iii)    to exploit all subsidiary rights in the Contribution,
iv)    to provide the inclusion of electronic links from the Contribution to third party material where-ever it may be located;
v)    to licence any third party to do any or all of the above.