Skydome Acoustical model

Authors

  • Jeffery S. Bamford Engineering Harmonics Inc., 61 Dixon Avenue, Toronto, Ontario, M4L 1N5

Abstract

In 1996, Engineering Harmonics was retained to investigate, test and re-tune the current sound system for Toronto's SkyDome. On the basis of this work and insight into the sound system, in 1997 SkyDome retained Engineering Harmonics again to prepare cost estimates and a plan to upgrade the systems. After receiving approval, Engineering Harmonics began a project to upgrade, replace and improve the system. This project involved the replacement and addition of loudspeakers, replacement of amplifiers and implementation of a digital audio transportation and DSP system. This article discusses the EASE computer model that was used to model the new loudspeakers for the lower two tiers of seating.

Additional Files

Published

1999-12-01

How to Cite

1.
Bamford JS. Skydome Acoustical model. Canadian Acoustics [Internet]. 1999 Dec. 1 [cited 2024 Nov. 4];27(4):34-5. Available from: https://jcaa.caa-aca.ca/index.php/jcaa/article/view/1256

Issue

Vol. 27 No. 4 (1999)

Section

Proceedings of the Acoustics Week in Canada

License

Author Licensing Addendum

This Licensing Addendum ("Addendum") is entered into between the undersigned Author(s) and Canadian Acoustics journal published by the Canadian Acoustical Association (hereinafter referred to as the "Publisher"). The Author(s) and the Publisher agree as follows:

  1. Retained Rights: The Author(s) retain(s) the following rights:

    • The right to reproduce, distribute, and publicly display the Work on the Author's personal website or the website of the Author's institution.
    • The right to use the Work in the Author's teaching activities and presentations.
    • The right to include the Work in a compilation for the Author's personal use, not for sale.

  2. Grant of License: The Author(s) grant(s) to the Publisher a worldwide exclusive license to publish, reproduce, distribute, and display the Work in Canadian Acoustics and any other formats and media deemed appropriate by the Publisher.

  3. Attribution: The Publisher agrees to include proper attribution to the Author(s) in all publications and reproductions of the Work.

  4. No Conflict: This Addendum is intended to be in harmony with, and not in conflict with, the terms and conditions of the original agreement entered into between the Author(s) and the Publisher.

  5. Copyright Clause: Copyright on articles is held by the Author(s). The corresponding Author has the right to grant on behalf of all Authors and does grant on behalf of all Authors, a worldwide exclusive license to the Publisher and its licensees in perpetuity, in all forms, formats, and media (whether known now or created in the future), including but not limited to the rights to publish, reproduce, distribute, display, store, translate, create adaptations, reprints, include within collections, and create summaries, extracts, and/or abstracts of the Contribution.