Comparison of methods for characterizing sound absorbing materials

Auteurs-es

  • Yacoubou Salissou GAUS, Department of Mechanical Engineering, Université de Sherbrooke, Qué. J1K 2R1, Canada
  • Raymond Panneton GAUS, Department of Mechanical Engineering, Université de Sherbrooke, Qué. J1K 2R1, Canada

Mots-clés :

Elastic moduli, Porosity, Vacuum, Archimedes principle, Metal foam, Static resistivity, Thermal characteristic dimension (TCD), Viscous characteristic dimension (VCD)

Résumé

A study was conducted to characterize three samples of metal foam, using direct, indirect, and inverse methods to highlight that the methods may yield large variability in the found parameters. Direct measurement of the open porosity was performed, using the Archimedes principle. It provided a direct measured value of open porosity through measurement of sample weight in vacuum, in air, and predicted the measurement error. Analytical solutions were used to determine the static airflow resistivity, tortuosity, viscous characteristic dimension (VCD), and thermal characteristic dimension (TCD) of the material, assuming that dynamic density, dynamic bulk modulus, and open porosity were known. The inverse method was applied the tortuosity and the two characteristic lengths, assuming porosity and static resistivity to be known from direct measurements. The results show that the parameter values are in better agreement from one sample to another and the deviation from mean values are acceptable.

Fichiers supplémentaires

Publié-e

2006-09-01

Comment citer

1.
Salissou Y, Panneton R. Comparison of methods for characterizing sound absorbing materials. Canadian Acoustics [Internet]. 1 sept. 2006 [cité 25 nov. 2024];34(3):32-3. Disponible à: https://jcaa.caa-aca.ca/index.php/jcaa/article/view/1808

Numéro

Vol. 34 No. 3 (2006)

Rubrique

Actes du congrès de la Semaine canadienne d'acoustique

Licence

Author Licensing Addendum

This Licensing Addendum ("Addendum") is entered into between the undersigned Author(s) and Canadian Acoustics journal published by the Canadian Acoustical Association (hereinafter referred to as the "Publisher"). The Author(s) and the Publisher agree as follows:

  1. Retained Rights: The Author(s) retain(s) the following rights:

    • The right to reproduce, distribute, and publicly display the Work on the Author's personal website or the website of the Author's institution.
    • The right to use the Work in the Author's teaching activities and presentations.
    • The right to include the Work in a compilation for the Author's personal use, not for sale.

  2. Grant of License: The Author(s) grant(s) to the Publisher a worldwide exclusive license to publish, reproduce, distribute, and display the Work in Canadian Acoustics and any other formats and media deemed appropriate by the Publisher.

  3. Attribution: The Publisher agrees to include proper attribution to the Author(s) in all publications and reproductions of the Work.

  4. No Conflict: This Addendum is intended to be in harmony with, and not in conflict with, the terms and conditions of the original agreement entered into between the Author(s) and the Publisher.

  5. Copyright Clause: Copyright on articles is held by the Author(s). The corresponding Author has the right to grant on behalf of all Authors and does grant on behalf of all Authors, a worldwide exclusive license to the Publisher and its licensees in perpetuity, in all forms, formats, and media (whether known now or created in the future), including but not limited to the rights to publish, reproduce, distribute, display, store, translate, create adaptations, reprints, include within collections, and create summaries, extracts, and/or abstracts of the Contribution.

Articles les plus lus du,de la,des même-s auteur-e-s

1 2 3 4 > >>