Testing of health canada's acoustic chamber at the consumer and clinical radiation protection bureau based on ISO standard 3745: 2003

Auteurs-es

  • Jason T. Tsang Healthy Environments and Consumer Safety Branch, Product Safety Directorate, Consumer and Clinical Radiation Protection Bureau, Acoustics Division, 775 Brookfield Road, Ottawa, ON K1A 1C1, Canada
  • Stephen E. Keith Healthy Environments and Consumer Safety Branch, Product Safety Directorate, Consumer and Clinical Radiation Protection Bureau, Acoustics Division, 775 Brookfield Road, Ottawa, ON K1A 1C1, Canada
  • William J. Gastmeier HGC Engineering, 2000 Argentia Road, Plaza 1, Mississauga, ON L5N 1P7, Canada

Mots-clés :

Acoustics, Electric breakdown, Electroacoustic transducers, Microphones, Radiation shielding, Tropical engineering, Acoustic chambers, And models, Directivity effects, Dynamic loudspeakers, Higher frequencies, ISO standards, Octave bands, Ontario, Pure tones, Signal to noises, Sound level meters, Sound sources, Third parties

Résumé

Third party acoustical certification testing was performed in Health Canada's acoustic chamber at the Consumer and Clinical Radiation Protection Bureau in Ottawa, Ontario. Tests were made using the pure tone method prescribed in Annex A of ISO 3745 (2003) and the results of the free fold performance testing were discussed. Measurements were conducted with a Gras Model 40 BE 1/4 inch microphone and Model 26CB preamplifier connected to a Bruel & Kjaer Type 2260 Precision Integrating Sound level Meter. Sound traverses were performed using pure-tome signals at 1/3 octave band center frequencies and the microphone was moved at 10 cm intervals. The results show that the dynamic loudspeaker directivity effects are more prevalent at the higher frequencies above 2 kHz. The two sound sources are found to be in accordance with the directionality and signal to noise requirements of ISO 3745.

Fichiers supplémentaires

Publié-e

2008-09-01

Comment citer

1.
Tsang JT, Keith SE, Gastmeier WJ. Testing of health canada’s acoustic chamber at the consumer and clinical radiation protection bureau based on ISO standard 3745: 2003. Canadian Acoustics [Internet]. 1 sept. 2008 [cité 29 avr. 2026];36(3):92-3. Disponible à: https://jcaa.caa-aca.ca/index.php/jcaa/article/view/2053

Numéro

Vol. 36 No. 3 (2008)

Rubrique

Actes du congrès de la Semaine canadienne d'acoustique

Licence

Author Licensing Addendum

This Licensing Addendum ("Addendum") is entered into between the undersigned Author(s) and Canadian Acoustics journal published by the Canadian Acoustical Association (hereinafter referred to as the "Publisher"). The Author(s) and the Publisher agree as follows:

  1. Retained Rights: The Author(s) retain(s) the following rights:

    • The right to reproduce, distribute, and publicly display the Work on the Author's personal website or the website of the Author's institution.
    • The right to use the Work in the Author's teaching activities and presentations.
    • The right to include the Work in a compilation for the Author's personal use, not for sale.

  2. Grant of License: The Author(s) grant(s) to the Publisher a worldwide exclusive license to publish, reproduce, distribute, and display the Work in Canadian Acoustics and any other formats and media deemed appropriate by the Publisher.

  3. Attribution: The Publisher agrees to include proper attribution to the Author(s) in all publications and reproductions of the Work.

  4. No Conflict: This Addendum is intended to be in harmony with, and not in conflict with, the terms and conditions of the original agreement entered into between the Author(s) and the Publisher.

  5. Copyright Clause: Copyright on articles is held by the Author(s). The corresponding Author has the right to grant on behalf of all Authors and does grant on behalf of all Authors, a worldwide exclusive license to the Publisher and its licensees in perpetuity, in all forms, formats, and media (whether known now or created in the future), including but not limited to the rights to publish, reproduce, distribute, display, store, translate, create adaptations, reprints, include within collections, and create summaries, extracts, and/or abstracts of the Contribution.