Development and Testing of an Aeroacoustic Wind Tunnel Test Section

Auteurs-es

  • Basim Al Tlua Carleton University
  • Joana Rocha Department of Mechanical and Aerospace Engineering

Résumé

A new aeroacoustic wind tunnel test section is developed and tested at Carleton University. The aeroacoustic test section is fitted with two anechoic chambers on the two side walls. Side walls of the test section are lined with acoustic transparency tensioned cloth screens, which act as an interface between the test section and the anechoic chambers to provide a smooth flow surface while eliminating the need for a jet catcher and reducing interference effects. The test section is tested in the medium speed closed-loop wind tunnel at Carleton University. The design layout of the wind tunnel and design treatments to improve acoustic performance are discussed. Experiments are conducted to verify the acoustic performance of the developed aeroacoustic wind tunnel test section. It is found that background noise is comparable with other existing aeroacoustic wind tunnel facilities. The trailing edge noise of a NACA0012 airfoil model is also measured as a benchmark test. Results reveal that noise radiated from the airfoil trailing edge model are adequately higher than the background noise for a wide frequency range, and also that a sawtooth serrated trailing edge is effective for reducing noise compared to a straight trailing edge.

Bibliographies de l'auteur-e

Basim Al Tlua, Carleton University

Department of Mechanical and Aerospace Engineering

Ph.D. Candidate

Joana Rocha, Department of Mechanical and Aerospace Engineering

Department of Mechanical and Aerospace Engineering

Associate Professor

Fichiers supplémentaires

Publié-e

2019-10-16

Comment citer

1.
Al Tlua B, Rocha J. Development and Testing of an Aeroacoustic Wind Tunnel Test Section. Canadian Acoustics [Internet]. 16 oct. 2019 [cité 23 nov. 2024];47(3):64-5. Disponible à: https://jcaa.caa-aca.ca/index.php/jcaa/article/view/3334

Numéro

Vol. 47 No. 3 (2019)

Rubrique

Actes du congrès de la Semaine canadienne d'acoustique

Licence

Author Licensing Addendum

This Licensing Addendum ("Addendum") is entered into between the undersigned Author(s) and Canadian Acoustics journal published by the Canadian Acoustical Association (hereinafter referred to as the "Publisher"). The Author(s) and the Publisher agree as follows:

  1. Retained Rights: The Author(s) retain(s) the following rights:

    • The right to reproduce, distribute, and publicly display the Work on the Author's personal website or the website of the Author's institution.
    • The right to use the Work in the Author's teaching activities and presentations.
    • The right to include the Work in a compilation for the Author's personal use, not for sale.

  2. Grant of License: The Author(s) grant(s) to the Publisher a worldwide exclusive license to publish, reproduce, distribute, and display the Work in Canadian Acoustics and any other formats and media deemed appropriate by the Publisher.

  3. Attribution: The Publisher agrees to include proper attribution to the Author(s) in all publications and reproductions of the Work.

  4. No Conflict: This Addendum is intended to be in harmony with, and not in conflict with, the terms and conditions of the original agreement entered into between the Author(s) and the Publisher.

  5. Copyright Clause: Copyright on articles is held by the Author(s). The corresponding Author has the right to grant on behalf of all Authors and does grant on behalf of all Authors, a worldwide exclusive license to the Publisher and its licensees in perpetuity, in all forms, formats, and media (whether known now or created in the future), including but not limited to the rights to publish, reproduce, distribute, display, store, translate, create adaptations, reprints, include within collections, and create summaries, extracts, and/or abstracts of the Contribution.