Measurements of mechanical properties of Adirondack spruce
Résumé
Adirondack spruce (Picea rubens), also known as Eastern red spruce or Appalachian spruce, is a conifer found primarily in New England, the Appalachians and eastern Canada. This wood has been historically used in the production of fancy foods such as spruce beer and spruce gum (from the needles especially), but also as construction lumber, pulpwood and even as Christmas trees. Adirondack spruce wood began to be used in the 19th century for piano, guitar and mandolin soundboards. Prior to World War II, it was indeed the preferred soundboard tone wood for several guitar makers and is still widely in use for this purpose.
Despite its large use in various fields, Adirondack spruce’s mechanical properties, like Young’s moduli in principal and transverse directions and shear modulus, are not well documented. In this work, several methods are used to evaluate such properties of twelve quarter-cut orthotropic plates selected for guitar soundboards. The considered methods and corresponding frequency ranges includes (1) Dynamical mechanical analysis, which provides values at low frequency (i.e. below 100 Hz), (2) Identification of low-frequency vibration modes between approximately 100 Hz and 500 Hz, (3) Spatial Fourier transform and inhomogeneous wave correlation between 500 Hz and 5000 Hz, and (4) Asymptotic methods up to 10 kHz. The identified values for the elastic constants of this orthotropic material are summarized and compared as a function of frequency.
Fichiers supplémentaires
Publié-e
Comment citer
Numéro
Rubrique
Licence
Author Licensing Addendum
This Licensing Addendum ("Addendum") is entered into between the undersigned Author(s) and Canadian Acoustics journal published by the Canadian Acoustical Association (hereinafter referred to as the "Publisher"). The Author(s) and the Publisher agree as follows:
-
Retained Rights: The Author(s) retain(s) the following rights:
- The right to reproduce, distribute, and publicly display the Work on the Author's personal website or the website of the Author's institution.
- The right to use the Work in the Author's teaching activities and presentations.
- The right to include the Work in a compilation for the Author's personal use, not for sale.
-
Grant of License: The Author(s) grant(s) to the Publisher a worldwide exclusive license to publish, reproduce, distribute, and display the Work in Canadian Acoustics and any other formats and media deemed appropriate by the Publisher.
-
Attribution: The Publisher agrees to include proper attribution to the Author(s) in all publications and reproductions of the Work.
-
No Conflict: This Addendum is intended to be in harmony with, and not in conflict with, the terms and conditions of the original agreement entered into between the Author(s) and the Publisher.
-
Copyright Clause: Copyright on articles is held by the Author(s). The corresponding Author has the right to grant on behalf of all Authors and does grant on behalf of all Authors, a worldwide exclusive license to the Publisher and its licensees in perpetuity, in all forms, formats, and media (whether known now or created in the future), including but not limited to the rights to publish, reproduce, distribute, display, store, translate, create adaptations, reprints, include within collections, and create summaries, extracts, and/or abstracts of the Contribution.
