Reverberation rooms and spatial uniformity

Authors

  • Ramani Ramakrishnan Department of Architectural Science, Ryerson University, Toronto, ON
  • Anant Grewal Institute for Aerospace Research, National Research Council of Canada, Ottawa, ON K1A-0R6

Keywords:

Absorption, Acoustic noise, Antennas, Building materials, Construction equipment, Materials properties, Low backgrounds, Noise controls, Reverberation chambers, Reverberation rooms, Sound absorptions, Sound levels, Sound powers, Space bounds, Spatial uniformities, Transmission properties

Abstract

Reverberation rooms are used as test rooms to investigate the level of sound power and to test the space bound hardware including antennas and satellites. These rooms can be used to understand transmission properties of building materials and absorption properties of noise control products. An ideal reverberation rooms need to have adequate volume, suitable shape, small sound absorption, and low background noise level. Two different rooms were used to evaluate the sound level produce by single sinusoidal tones and bands of noise. The reverberation chambers can be used to determine the spatial uniformity of the chamber and the low-frequency cut-off limit of the chamber. It was observed that the spatial uniformity of the chamber sound level can be satisfied for broadband sound levels.

Downloads

Published

2008-09-01

How to Cite

1.
Ramakrishnan R, Grewal A. Reverberation rooms and spatial uniformity. Canadian Acoustics [Internet]. 2008 Sep. 1 [cited 2021 Jul. 29];36(3):28-9. Available from: https://jcaa.caa-aca.ca/index.php/jcaa/article/view/2021

Issue

Section

Proceedings of the Acoustics Week in Canada

Most read articles by the same author(s)

1 2 3 4 5 > >>