Comparison of computational methods for rectangular silencer insertion loss prediction

Authors

  • R. Ramakrishnan
  • R. Stevens
  • B. Howe

Keywords:

boundary-elements methods, finite element analysis, noise abatement, computational methods, rectangular silencer, insertion loss, duct silencers, boundary element method, modal finite element method

Abstract

The insertion loss (IL) of duct silencers with absorbent material can be predicted by a number numerical techniques. Two of the most common methods are the boundary element method and the modal finite element method. These two procedures are applied to predict the IL of rectangular silencers and comparative results are presented

Additional Files

Published

1991-09-01

How to Cite

1.
Ramakrishnan R, Stevens R, Howe B. Comparison of computational methods for rectangular silencer insertion loss prediction. Canadian Acoustics [Internet]. 1991 Sep. 1 [cited 2024 Oct. 8];19(4):5-6. Available from: https://jcaa.caa-aca.ca/index.php/jcaa/article/view/642

Issue

Vol. 19 No. 4 (1991)

Section

Proceedings of the Acoustics Week in Canada

License

Author Licensing Addendum

This Licensing Addendum ("Addendum") is entered into between the undersigned Author(s) and Canadian Acoustics journal published by the Canadian Acoustical Association (hereinafter referred to as the "Publisher"). The Author(s) and the Publisher agree as follows:

  1. Retained Rights: The Author(s) retain(s) the following rights:

    • The right to reproduce, distribute, and publicly display the Work on the Author's personal website or the website of the Author's institution.
    • The right to use the Work in the Author's teaching activities and presentations.
    • The right to include the Work in a compilation for the Author's personal use, not for sale.

  2. Grant of License: The Author(s) grant(s) to the Publisher a worldwide exclusive license to publish, reproduce, distribute, and display the Work in Canadian Acoustics and any other formats and media deemed appropriate by the Publisher.

  3. Attribution: The Publisher agrees to include proper attribution to the Author(s) in all publications and reproductions of the Work.

  4. No Conflict: This Addendum is intended to be in harmony with, and not in conflict with, the terms and conditions of the original agreement entered into between the Author(s) and the Publisher.

  5. Copyright Clause: Copyright on articles is held by the Author(s). The corresponding Author has the right to grant on behalf of all Authors and does grant on behalf of all Authors, a worldwide exclusive license to the Publisher and its licensees in perpetuity, in all forms, formats, and media (whether known now or created in the future), including but not limited to the rights to publish, reproduce, distribute, display, store, translate, create adaptations, reprints, include within collections, and create summaries, extracts, and/or abstracts of the Contribution.